Accudynetest logo

Products available online direct from the manufacturer

This table is provided as an information service by Diversified Enterprises.

This table compares critical surface tension to contact angle with water for a variety of polymers. It can be sorted by column — just click on the column header as desired to re-order this printable table. Click on any footnote for additional information.

print this sort order (table and references only - will open in new browser window)

Critical Surface Tension and Contact Angle with Water for Various Polymers

ID #(1)
ascendingdescending
Polymer Name(2)
ascendingdescending
CAS #(3)
ascendingdescending
γS(4)
ascendingdescending
Contact Angle(5)
ascendingdescending
6 Nylon 6,6 32131-17-2 42.2 68.3
27 Polyphenylene sulfide (PPS) 26125-40-6 38 80.3
15 Poly n-butyl methacrylate (PnBMA) 25608-33-7 29.8 91
11 Nylon 11 25587-80-8 35.6 82
21 Polyethylene oxide (PEO, PEG, polyethylene glycol) 25322-68-3 43 63
34 Polyvinyl alcohol (PVOH) 25213-24-5 37 51
16 Poly t-butyl methacrylate (PtBMA) 25189-00-9 18.1 108.1
30 Polysulfone (PSU) 25135-51-7 42.1 70.5
3 Fluorinated ethylene propylene (FEP) 25067-11-2 19.1 108.5
22 Polyethylene terephthalate (PET) 25038-59-9 39 72.5
5 Nylon 6 (polycaprolactum, aramid 6) 25038-54-4 43.9 62.6
36 Polyvinyl fluoride (PVF) 24981-14-4 32.7 84.5
32 Polytrifluoroethylene 24980-67-4 26.5 92
26 Polyoxymethylene (POM, polyacetal, polymethylene oxide) 24969-26-4 37 76.8
38 Polyvinylidene fluoride (PVDF) 24937-79-9 31.6 89
12 Nylon 12 24937-16-4 37.1 72.4
17 Polycarbonate (PC) 24936-68-3 44 82
19 Polydimethylsiloxane (PDMS) 9016-00-6 20.1 107.2
25 Polymethyl methacrylate (PMMA, acrylic, plexiglas) 9011-14-7 37.5 70.9
1 Acrylonitrile butadiene styrene (ABS) 9003-56-9 38.5 80.9
29 Polystyrene (PS) 9003-53-6 34 87.4
24 Polyisobutylene (PIB, butyl rubber) 9003-27-4 27 112.1
33 Polyvinyl acetate (PVA) 9003-20-7 35.3 60.6
14 Polybutadiene 9003-17-2 29.3 96
20 Polyethylene (PE) 9002-88-4 31.6 96
35 Polyvinyl chloride (PVC) 9002-86-2 37.9 85.6
37 Polyvinylidene chloride (PVDC, Saran) 9002-85-1 40.2 80
31 Polytetrafluoroethylene (PTFE) 9002-84-0 19.4 109.2
18 Polychlorotrifluoroethylene (PCTFE) 9002-83-9 30.8 99.3
13 Paraffin 8002-74-2 24.8 108.9
4 Hexatriacontane 630-06-8 20.6 108.5
28 Polypropylene (PP) (a) 30.5 102.1
23 Poly(hexafluoropropylene) - 16.9 112
10 Nylon 10,10 - 32 94
9 Nylon 9,9 - 34 86
8 Nylon 8,8 - 34 86
7 Nylon 7,7 - 43 70
2 Epoxies - 44.5 76.3

(1) ID numbers identify polymer data points in critical surface tension vs. contact angle chart.

(2) Names which are most widely used to describe the material or family of materials (e.g., polyurethanes and epoxies) at hand are preferred here. Commonly used acronyms and synonyms are also shown. To top of page

(3) CAS (Chemical Abstract Series) numbers are shown where available. In a number of instances, more than one CAS number is assigned to a given polymer — in some cases the details and nuances of these divergences are not at all clear. We have tried to reference the CAS number which appears to have the widest use with reference to the solid state properties of the given polymer . To top of page

(4) Critical surface tension in mJ/m2 (equivalent to dynes/cm), generally determined by the Zisman method (regression of the cosine of the contact angle), or by the wetting tension method (using solutions of 2-ethoxyethanol and formamide, per ASTM Std. D-2578). To top of page

(5) Contact angle with water, in degrees. The arithmetic mean of all equilibrium (Young's) and advancing contact angle measurements is shown. Generally, the equilibrium angle is similar to, but slightly lower than, the advancing angle; the balance of equilibrium vs. advancing contact angles from which this summary is drawn may have some effect on the average as shown for some polymers. To top of page

Contact Angle with Water vs. Critical Surface Tension for Various Polymers

previous page | top of page