Accudynetest logo

Products available online direct from the manufacturer

This table is provided as an information service by Diversified Enterprises.

This table highlights the critical surface tension, surface free energy, contact angles with water, and Hansen Solubility Parameters with interaction radius for a variety of polymers. For all columns except polymer name, CAS #, change in surface tension per degree Celsius (dγ/dt), and total Hansen Solubility Parameter (δ) the first row of data for each material is the average of surveyed values; the second row shows the standard deviation, with the number of data points (n) in parentheses. For n = 1, no standard deviation figure is shown. Click on any column's footnote for details. Click on any polymer name for original research results. An analogous table, which shows polar/dispersion and acid—base components of surface energy, can be seen here. Comments on methodology and the like can be found here.

This table can be sorted by column — just click on the column header as desired to re-order this printable table. Click on any footnote for additional information.

Some print software will automatically scale this page so that it prints well with “portrait” orientation. If your printer doesn't have this feature, you will want to change your print set-up to “landscape” orientation prior to printing.

print this sort order (table and references - will open new browser window)

Critical Surface Tension, Surface Free Energy, Contact Angles with Water, and Hansen Solubility Parameters for Various Polymers

Name(1)
ascendingdescending
CAS #(2)
ascendingdescending
γc(3)
ascendingdescending
γS(4)
ascendingdescending
dγ/dt(5)
ascendingdescending
θWY(6)
ascendingdescending
θWA(7)
ascendingdescending
θWR(8)
ascendingdescending
W (9)
ascendingdescending
δ(10)
ascendingdescending
δD(11)
ascendingdescending
δP(12)
ascendingdescending
δH(13)
ascendingdescending
Ro(14)
ascendingdescending
Nylon 6,6 32131-17-2 42.2 44.3 -0.065(c) 67.6 69.3 40.9 27.6 25.8 17.2 9.9 16.5 4.4
  4.50(12) 3.62(18) 4.94(7) 2.91(5) -(1) -(1) 1.11 1.10 6.80 1.24
Polyvinyl alcohol (PVOH) 25213-24-5 37.0 44.2 - 51.0 - - - 25.2 14.7 14.1 14.9 10.5
  -(1) 6.56(4) -(1) 2.51(4) 2.13(4) 2.18(4) 1.38(4)
Cellophane 9005-81-6 - 45.4 - - - - - 28.5 16.1 18.5 14.5 9.3
  -(1) -(1) -(1) -(1) -(1)
Polyvinyl butyral 63148-65-2 28.0 38.0 - - - - - 24.6 19.1 9.5 12.2 10.0
  -(1) -(1) 0.92(3) 4.50(3) 1.65(3) 1.53(3)
Nylon 11 25587-80-8 35.6 34.0 - - 82.0 - - 20.5 17.0 4.4 10.6 5.1
  4.40(8) -(1) 9.90(2) -(1) -(1) -(1) -(1)
Nylon 6 (polycaprolactum, aramid 6) 25038-54-4 43.9 45.4 - - 65.5 42.4 26.8 20.3 17.0 3.4 10.6 5.1
  2.42(3) 3.52(6) 4.27(7) -(1) -(1) -(1) -(1) -(1) -(1)
Polyvinylidene fluoride (PVDF) 24937-79-9 31.6 31.5 - 86.0 93.4 91.0 1.0 23.2 17.0 12.1 10.2 4.1
  5.83(5) 5.29(13) 4.00(3) 1.98(2) -(1) -(1) -(1) -(1) -(1) -(1)
Polyvinyl acetate (PVA) 9003-20-7 35.3 38.5 -0.066(b) 60.6 - - - 25.7 20.9 11.3 9.7 13.7
  2.08(3) 2.75(14) -(1) -(1) -(1) -(1) -(1)
Epoxies - 44.5 45.3 - 54.0 87.5 - - 24.1 19.2 10.9 9.6 11.1
  0.71(2) 4.21(6) -(1) 3.54(2) 2.53(13) 2.37(13) 2.66(13) 3.98(13)
Nitrocellulose (cellulose nitrate) 9004-70-0 - 42.7 - - 54.7 20.0 34.7 23.5 16.2 14.1 9.5 10.7
  4.10(3) 11.0(3) 22.5(3) 12.1(3) 1.06(2) 0.85(2) 1.06(2) 1.13(2)
Cellulose acetate (CA) 9004-35-7 37.5 41.1 - 54.5 - - - 23.5 17.1 13.1 9.4 10.6
  2.12(2) 3.37(5) -(1) 1.58(4) 4.41(4) 3.81(4) 2.96(4)
Polyacrylonitrile (PAN) 25014-41-9 47.0 46.8 - - - - - 27.4 21.7 14.1 9.1 10.9
  4.24(2) 6.62(4) -(1) -(1) -(1) -(1)
Nylon 12 24937-16-4 37.1 39.3 - - 72.4 56.5 20.5 22.2 18.5 8.1 9.1 6.3
  8.63(2) 3.02(3) 5.37(3) -(1) -(1) -(1) -(1) -(1) -(1)
Polyvinylidene chloride (PVDC, Saran) 9002-85-1 40.2 43.7 - 80.0 - - - 23.1 19.0 9.6 9.0 5.8
  3.89(4) 2.81(9) -(1) 1.98(2) 0.64(2) 1.70(2) 2.62(2)
Polyurethanes - - 37.5 - 77.5 83.1 35.5 47.4 22.8 18.8 10.0 8.2 9.8
  4.01(11) 7.52(8) 14.2(9) 16.3(9) 21.7(9) 1.53(11) 2.54(11) 3.09(11) 3.48(11)
Polymethacrylonitrile (PMAN) 25067-61-2 39.0 42.3 - - - - - 23.7 17.2 14.4 7.6 3.8
  -(1) 3.08(3) -(1) -(1) -(1) -(1)
Polysulfone (PSU) 25135-51-7 42.1 44.9 - 75.0 66.0 - - 21.5 18.5 8.5 7.0 9.4
  1.48(2) 2.47(2) -(1) -(1) 2.17(3) 2.61(3) 1.12(3) 1.69(3)
Acrylonitrile butadiene styrene (ABS) 9003-56-9 38.5 42.0 - 89.7 72.0 - - 19.2 17.0 5.7 6.8 9.4
  -(1) 4.70(8) -(1) -(1) 0.92(2) 4.17(2) 0.49(2) 2.19(2)
Polyethylene terephthalate (PET) 25038-59-9 39.0 44.0 -0.065(c) 72.0 73.0 54.5 20.0 20.8 18.7 6.3 6.7 6.5
  5.71(11) 3.85(28) 6.33(17) 7.32(17) 5.77(8) 11.0(8) 1.25(8) 2.03(8) 2.80(8) 3.36(8)
Poly n-butyl methacrylate (PnBMA) 25608-33-7 29.8 33.1 -0.059(b) 91.0 - - - 18.4 16.0 6.2 6.6 9.5
  1.94(3) 2.70(12) -(1) -(1) -(1) -(1) -(1)
Polyethersulfone (PES) 25154-01-2 - 47.0 - 68.5 - - - 21.0 18.3 8.2 6.4 6.3
  -(1) 0.71(2) 0.91(6) 3.10(6) 2.33(6) 2.61(6)
Polyetherimide (PEI) 61128-46-9 - - - 76.5 - - - 19.8 17.7 6.0 6.4 4.8
  12.0(2) 1.07(5) 1.14(5) 2.43(5) 1.70(5)
Poly iso-butyl methacrylate (PIBMA) 9011-15-8 - 30.9 -0.060(b) - - - - 20.0 18.3 4.9 6.3 9.4
  0.00(2) 2.11(3) 0.93(3) 5.12(3) 2.10(3)
Polyvinyl chloride (PVC) 9002-86-2 37.9 40.1 - 83.2 91.9 75.3 - 20.0 16.8 8.9 6.1 8.5
  7.05(11) 3.66(22) 10.3(8) 7.88(3) -(1) 1.65(5) 1.95(5) 1.78(5) 3.94(5)
Polycarbonate (PC) 24936-68-3 44.0 42.3 -0.060(c) 81.3 84.0 68.0 16.0 22.2 19.6 8.8 5.7 10.2
  2.83(2) 5.32(7) 5.77(3) -(1) -(1) -(1) 1.75(3) 2.58(3) 1.04(3) 4.06(3)
Polymethyl methacrylate (PMMA, acrylic, plexiglas) 9011-14-7 37.5 41.8 -0.076(b) 69.1 74.7 54.2 18.4 21.3 17.9 10.1 5.4 11.0
  4.68(12) 3.63(38) 6.08(17) 10.2(8) 5.44(2) 1.98(2) 1.37(5) 4.46(5) 3.73(5) 4.63(5)
Ethyl cellulose 9004-57-3 - 30.3 - - 84.5 - - 20.4 19.0 5.6 4.9 7.9
  2.40(2) -(1) 1.56(2) 1.84(2) 1.41(2) 2.83(2)
Polyisobutylene (PIB, butyl rubber) 9003-27-4 27.0 33.2 -0.064(b) - 112.1 - - 17.1 16.4 1.7 4.7 7.9
  0.00(2) 3.21(10) -(1) 1.26(6) 2.15(6) 2.08(6) 2.46(6)
Polyethyl methacrylate (PEMA) 9003-42-3 32.8 34.0 -0.070(c) - - - - 20.0 17.5 8.5 4.7 9.6
  0.90(4) 2.50(7) 1.34(3) 0.62(3) 3.82(3) 1.99(3)
Polychlorotrifluoroethylene (PCTFE) 9002-83-9 30.8 30.7 -0.067(c) 90.0 104.0 72.0 32.0 16.5 15.6 2.5 4.7 5.8
  1.34(4) 3.79(7) -(1) 0.00(2) 7.07(2) 7.07(2) 2.10(3) 1.46(3) 2.44(3) 1.56(3)
Polystyrene (PS) 9003-53-6 34.0 38.3 -0.072(b) 85.3 88.5 81.8 10.0 23.9 22.8 5.8 4.3 12.7
  4.27(18) 5.23(32) 6.08(8) 5.75(15) 3.86(4) 2.65(3) -(1) -(1) -(1) -(1)
Polyethylene (PE) 9002-88-4 31.6 33.5 -0.057(b) 94.9 97.2 83.1 13.9 17.6 16.8 3.8 3.8 6.6
  2.05(21) 3.02(62) 6.96(27) 5.80(26) 10.7(9) 8.66(9) 0.88(7) 1.94(7) 2.52(7) 2.84(7)
Polyphenylene sulfide (PPS) 26125-40-6 38.0 46.8 - 80.3 - - - 19.8 18.7 5.3 3.7 6.7
  -(1) 3.29(3) 1.53(3) -(1) -(1) -(1) -(1)
Polytetrafluoroethylene (PTFE) 9002-84-0 19.4 21.8 -0.058(c) 109.4 108.9 96.0 14.3 16.7 16.2 1.8 3.4 3.9
  1.49(8) 3.24(35) 5.70(17) 7.06(8) 8.72(3) 10.6(3) -(1) -(1) -(1) -(1)
Polybutadiene 9003-17-2 29.3 45.9 -0.144(d) 96.0 - - - 18.0 17.5 2.3 3.4 6.6
  3.79(3) 3.89(2) -0.110(e) 1.41(2) -(1) -(1) -(1) -(1)
Fluorinated ethylene polypropylene (FEP) 25067-11-2 19.1 18.5 - 105.7 112.7 98.5 14.8 19.6 19.0 4.0 3.0 4.0
  1.27(2) 2.25(7) 4.54(6) 5.03(4) 5.28(4) 1.31(3) -(1) -(1) -(1) -(1)
Cellulose acetate butyrate (CAB) 9004-36-8 - 34.0 - - - - - 22.2 17.2 13.8 2.8 12.6
  -(1) -(1) -(1) -(1) -(1)
Polyphenylene oxide (PPO) 25134-01-4 47.0 46.0 - - - - - 19.3 16.9 8.9 2.7 11.7
  -(1) -(1) -(1) -(1) -(1) -(1)
Polyisoprene (PIP) 9003-31-0 - 32.3 - - - - - 18.4 18.1 2.4 2.3 10.3
  1.53(3) 2.32(3) 1.40(3) 2.66(3) 3.40(3)
Polypropylene (PP) (a) 30.5 30.2 -0.058(b) 94.9 107.3 89.0 20.2 18.0 17.7 2.9 1.2 6.2
  1.50(3) 2.77(32) 5.29(11) 7.75(15) 5.73(6) 2.72(6) 0.46(2) 2.80(2) 1.71(2) 1.76(2)
Thermoplastic polyolefin (TPO) - - 30.9 - - 101.5 79.0 22.5 - - - - -
  3.45(11) 3.54(2) 7.07(2) 3.54(2)
Polyxylylene (parylene) - - 46.3 - - - - - - - - - -
  -(1)
Polyvinyl pyrrolidone (PVP) 9003-39-8 - 46.0 - - - - - - - - - -
  3.61(2)
Polyvinyl proprionate 25035-84-1 - 34.0 -0.072(c) - - - - - - - - -
  -(1)
Polyvinyl octanoate - - 28.7 -0.061(c) - - - - - - - - -
  -(1)
Polyvinyl hexanoate - - 28.9 -0.063(c) - - - - - - - - -
  -(1)
Polyvinyl hexadecanoate - - 30.9 -0.066(c) - - - - - - - - -
  -(1)
Polyvinyl formal 63450-15-7 39.0 - - - - - - - - - - -
  -(1)
Polyvinyl fluoride (PVF) 24981-14-4 32.7 36.4 - 82.5 88.6 - - - - - - -
  4.66(4) 4.07(14) 3.54(2) -(1)
Polyvinyl ethyl ether (polyethoxyethylene) 25104-37-4 - 36.0 - - - - - - - - - -
  -(1)
Polyvinyl dodecanoate - - 29.1 -0.063(c) - - - - - - - - -
 
Polyvinyl decanoate - - 28.9 -0.062(c) - - - - - - - - -
  -(1)
Polyvinyl butyrate - - 31.1 -0.070(c) - - - - - - - - -
  -(1)
Polytrifluoroethylene 24980-67-4 26.5 26.5 - 92.0 - - - - - - - -
  3.99(3) 2.79(7) -(1)
Polytetramethylene oxide - - 32.8 - - - - - - - - - -
  1.27(2)
Polytetrahydrofuran (PTHF) 25190-06-1 - 31.9 - - - - - - - - - -
  0.00(2)
Polystearyl methacrylate 25639-21-8 20.8 36.3 - - - - - - - - - -
  -(1) -(1)
Polypropylene isophthalate - - 49.3 -0.083(c) - - - - - - - - -
  -(1)
Polypropylene glycol (PPG, polypropylene oxide) 25322-69-4 32.0 30.6 -0.079(b) - - - - - - - - -
  -(1) 2.36(7)
Poly n-propyl methacrylate 2210-79-9 32.0 33.2 -0.065(c) - - - - - - - - -
  -(1) -(1)
Poly(phosphazene) - 16.5 15.8 - - - - - - - - - -
  -(1) 0.35(2)
Polyphenyl methacrylate - 35.0 - - - - - - - - - - -
  -(1)
Polyoxymethylene (POM, polyacetal, polymethylene oxide) 24969-26-4 37.0 38.6 - 74.5 79.0 54.0 25.0 - - - - -
  1.41(2) 5.68(3) -(1) -(1) -(1) -(1)
Polyoctyl methacrylate - 23.5 - - - - - - - - - - -
  -(1)
Poly(nonafluoroisobutyl acrylate) - - 14.0 - - - - - - - - - -
  -(1)
Polymethylphenylsilylene - - 43.7 - - - - - - - - - -
  0.57(2)
Polymethylphenylsiloxane 9005-12-3 - 26.1 - - - - - - - - - -
  -(1)
Poly a-methyl styrene 25014-31-7 - 38.7 -0.058(b) - - - - - - - - -
  -(1)
Poly(4-methyl pentene-1) - - 25.0 - - - - - - - - - -
  -(1)
Polymethyl acrylate (PMA) 25087-26-7 38.0 39.8 -0.070(c) - - - - - - - - -
  4.24(2) 2.21(9)
Polylauryl methacrylate 25719-52-2 21.3 32.8 - - - - - - - - - -
  -(1) -(1)
Polyimide (PI) 25038-81-7 - 43.8 - 71.5 79.9 48.0 31.3 - - - - -
  6.80(4) 2.07(6) 5.01(8) 12.2(8) 10.4(8)
Poly(2-hydroxyethyl methacrylate) 24249-16-5 37.0 - - - - - - - - - - -
  -(1)
Poly(hexyl methacrylate) 25087-17-6 27.5 30.0 -0.062(c) - - - - - - - - -
  -(1) 0.00(2)
Poly(hexafluoropropylene) - 16.9 15.9 - 112.0 - - - - - - - -
  0.96(3) 2.67(4) -(1)
Poly(hexachlorobutadiene) - - 41.5 - - - - - - - - - -
  -(1)
Poly(heptafluoroisopropyl methacrylate) - - 15.0 - - - - - - - - - -
  -(1)
Poly(heptafluoroisopropyl acrylate) - - 14.0 - - - - - - - - - -
  -(1)
Poly(heptadecafluorooctyl methacrylate) - - 15.3 - - - - - - - - - -
  -(1)
Polyethylene oxide (PEO, PEG, polyethylene glycol) 25322-68-3 43.0 43.1 -0.095(c) 63.0 - - - - - - - -
  -(1) 2.07(16) -(1)
Poly 2-ethylhexyl methacrylate 25719-51-1 - 28.8 -0.062(c) - - - - - - - - -
  -(1)
Poly 2-ethylhexyl acrylate 9003-77-4 31.0 29.7 -0.070(c) - - - - - - - - -
  -(1) 0.71(2)
Polyethyl acrylate (PEA) 9003-32-1 34.0 35.1 -0.070(c) - - - - - - - - -
  1.41(2) 1.47(6)
Polyetheretherketone (PEEK) 29658-26-2 - 42.1 - 91.0 85.0 55.0 30.0 - - - - -
  -(1) -(1) -(1) -(1) -(1)
Polyepichlorohydrin 24969-06-0 35.0 43.2 - - - - - - - - - -
  0.00(2) -(1)
Polydimethylsiloxane (PDMS) 9016-00-6 20.1 20.4 -0.048(b) 107.8 107.0 69.1 39.3 - - - - -
  3.17(7) 1.54(26) 8.78(3) 4.44(9) 7.10(7) 3.73(7)
Poly(dimethylaminoethyl methacrylate) - - 36.0 - - - - - - - - - -
  -(1)
Polydiethylsiloxane (PDES) 63148-61-8 - 25.7 -0.073(c) - - - - - - - - -
  -(1)
Polychloroprene 9010-98-4 38.0 40.9 -0.086(b) - - - - - - - - -
  0.00(2) 3.63(7)
Polybutylene terephthalate (PBT) 26062-94-2 - 46.3 - - 84.0 - - - - - - -
  0.51(5) 0.00(2)
Polybutylene isophthalate - - 47.8 -0.080(c) - - - - - - - - -
  -(1)
Poly t-butyl methacrylate (PtBMA) 25189-00-9 18.1 30.5 -0.059(b) 108.1 - - - - - - - -
  -(1) 0.00(2) -(1)
Poly n-butyl acrylate 9003-49-0 29.5 32.8 -0.070(c) - - - - - - - - -
  2.12(2) 1.82(3)
Polybenzyl methacrylate (PBMA) 25085-83-0 36.0 - - - - - - - - - - -
  -(1)
Poly(L-alanine) 25191-17-7 - 45.2 - - - - - - - - - -
  -(1)
Polyacrylamide 9003-05-8 34.3 52.3 - - - - - - - - - -
  4.60(2) -(1)
Polyacetylene (polyethyne) - - 51.5 - 72.0 - - - - - - - -
  0.71(2) -(1)
Phenoxy resin 26402-79-9 - 43.0 - - - - - - - - - -
  -(1)
Paraffin 8002-74-2 24.8 27.9 -0.060(c) 109.3 108.5 96.0 11.0 - - - - -
  6.53(3) 3.96(12) 1.84(2) 2.12(2) -(1) -(1)
Nylon 10,10 - 32.0 - - - 94.0 - - - - - - -
  -(1) -(1)
Nylon 9,9 - 34.0 - - - 86.0 - - - - - - -
  -(1) -(1)
Nylon 8,8 - 34.0 - - - 86.0 - - - - - - -
  -(1) -(1)
Nylon 7,7 - 43.0 - - - 70.0 - - - - - - -
  -(1) -(1)
Nylon 6,12 24936-74-1 - 67.0 - - - - - - - - - -
  -(1)
Nylon 6,10 9008-66-6 - 40.5 - - 71.0 - - - - - - -
  -(1) -(1)
Nylon 4 24938-56-5 - 48.5 - - - - - - - - - -
  -(1)
Nylon 2 (polyglycine) 25718-94-9 - 50.1 - - - - - - - - - -
  -(1)
Nafion 31175-20-9 - - - - 90.5 - - - - - - -
  4.80(4)
2-Hydroxyethyl methacrylate (HEMA, ethylene glycol monoacrylate) 867-77-9 - 56.8 - - 59.0 - - - - - - -
  1.20(2) -(1)
Hexatriacontane 630-06-8 20.6 22.8 -0.066(c) 108.2 109.0 - - - - - - -
  1.30(6) 5.03(9) 4.03(2) -(1)
Ethylene-propylene-diene-monomer (EPDM) 25038-36-2 - 32.5 - 91.0 - - - - - - - -
  4.31(2) -(1)
Ethyl methacrylate (EMA) 97-63-2 - 42.0 - - 74.0 - - - - - - -
  1.06(2) -(1)
Eicosane 112-95-8 - 28.9 -0.0833(c) - - - - - - - - -
  -(1)
Cellulose triacetate 9012-09-3 48.8 - - - - - - - - - - -
  -(1)
Aramid (Kevlar) 26125-61-1 - 45.7 - - 63.7 - - - - - - -
  1.76(3) 3.54(2)
Amorphous fluoropolymer (Teflon AF) - - - - - 117.5 90.3 27.1 - - - - -
  5.67(5) 3.42(5) 9.13(5)
Aluminum foil (f) 7429-90-5 - 41.2 - 81.3 - - - - - - - -
  2.47(2) 4.60(2) - - - - - - - -

(a) Atactic PP CAS #9003-08-0; isotactic PP CAS #25085-53-4.To top of page

(b) S. Wu, J. Macromol. Sci., C10, 1 (1974).To top of page

(c) S. Wu, in Polymer Handbook, 3rd Ed., J. Brandrup and E.H. Immergut, eds., Wiley-Interscience, New York, NY, 1989, p. VI: 414-426.To top of page

(d) Polybutadiene data for carboxyl end group; S. Wu, in Polymer Handbook, 3rd Ed., J. Brandrup and E.H. Immergut, eds., Wiley-Interscience, New York, NY, 1989, p. VI: 414-426.To top of page

(e) Polybutadiene data for methyl ester end group; S. Wu, in Polymer Handbook, 3rd Ed., J. Brandrup and E.H. Immergut, eds., Wiley-Interscience, New York, NY, 1989, p. VI: 414-426.To top of page

(f) Aluminum foil, while obviously not a polymer, is included due to its widespread use in package converting and other industries.To top of page

(1) Names which are most widely used to describe the material or family of materials (e.g., polyurethanes and epoxies) at hand are preferred here. Commonly used acronyms and synonyms are also shown.To top of page

(2) CAS (Chemical Abstract Series) numbers are shown where available. In a number of instances, more than one CAS number is assigned to a given polymer — in some cases the details and nuances of these divergences are not at all clear. We have tried to reference the CAS number which appears to have the widest use with reference to the solid state properties of the given polymer.To top of page

(3) γc: Critical surface tension in mJ/m2 (equivalent to dynes/cm), generally determined by the Zisman method (regression of the cosine of the contact angle), or by the wetting tension method (using solutions of 2-ethoxyethanol and formamide, per ASTM Std. D-2578).To top of page

(4) γs: Surface free energy in mJ/m2 (equivalent to dynes/cm), as measured, estimated, and calculated by a wide variety of methods and theories.To top of page

(5) dγ/dt: Change in surface energy in mJ/m2 (equivalent to dynes/cm) per degree Kelvin (or Celsius). To top of page

(6) θWY: Equilibrium (or Young's) contact angle with water, in degrees.To top of page

(7) θWA: Advancing contact angle with water, in degrees.To top of page

(8) θWR: Retreating contact angle with water, in degrees.To top of page

(9)W: Contact angle hysteresis (difference between advancing and retreating) with water, in degrees.To top of page

(10) δ: Total Hansen solubility parameter (square root of the sum of squares of the average values for dispersion, polar, and hydrogen bonding components), in MPa1/2 (equivalent to joules/cubic centimeter; 2.0455 x (cal/cc)1/2) @ 20-25oC (293.15-298.15 K). All data from Hansen Solubility Parameters: A User's Handbook, 2nd Ed., C.M. Hansen, CRC Press, Boca Raton, FL, 2007.To top of page

(11) δD: Hansen dispersion solubility parameter, in MPa1/2 (equivalent to joules/cubic centimeter; 2.0455 x (cal/cc)1/2) @ 20-25oC (293.15-298.15 K). All data from Hansen Solubility Parameters: A User's Handbook, 2nd Ed., C.M. Hansen, CRC Press, Boca Raton, FL, 2007.To top of page

(12) δP: Hansen polar solubility parameter, in MPa1/2 (equivalent to joules/cubic centimeter; 2.0455 x (cal/cc)1/2) @ 20-25oC (293.15-298.15 K). All data from Hansen Solubility Parameters: A User's Handbook, 2nd Ed., C.M. Hansen, CRC Press, Boca Raton, FL, 2007.To top of page

(13) δH: Hansen hydrogen bonding solubility parameter, in MPa1/2 (equivalent to joules/cubic centimeter; 2.0455 x (cal/cc)1/2) @ 20-25oC (293.15-298.15 K). All data from Hansen Solubility Parameters: A User's Handbook, 2nd Ed., C.M. Hansen, CRC Press, Boca Raton, FL, 2007.To top of page

(14) Ro: Interaction radius. All data from Hansen Solubility Parameters: A User's Handbook, 2nd Ed., C.M. Hansen, CRC Press, Boca Raton, FL, 2007.To top of page

previous page | top of page