ACCU DYNE TEST™ Bibliography

Provided as an information service by Diversified Enterprises.

total 2126 entries
showing result page 1 of 54, ordered by “Descending Date”.

2126. Smith, R.E., “Introduction to tensiometry,” http://www.accudynetest.com/tensiometry/test_method.html, Apr 2009.

2125. Smith, R.E., “DuNouy tensiometer test method,” http://www.accudynetest.com/tensiometry_test_method.html, Apr 2009.

2115. Smith, R.E., “Practical industrial wettability testing,” http://www.accudynetest.com/wettability_testing.html, Apr 2009.

2107. Kos, S., “Newest surface treaters achieve higher dyne levels, higher ROI,” Flexible Packaging, 11, 22-25 (Apr 2009).

2106. Kos, S., “Outlook on surface treatment's future,” http://www.flexpackmag.com/CDA/Articles, Apr 2009.

2121. Smith, R.E., “Critical surface tension and contact angle with water for various polymers,” http://www.accudynetest.com/polytable_03.html, Mar 2009.

2120. Smith, R.E., “Surface free energy components by polar/dispersion and acid-base analysis, and Hansen Solubility Parameters for various polymers,” http://www.accudynetest.com/polytable_02.html, Mar 2009.

2119. Smith, R.E., “Critical surface tension, surface free energy, contact angles with water, and Hansen Solubility Parameters for various polymers,” http://www.accudynetest.com/polytable_01.html, Mar 2009.

2118. Smith, R.E., “Polymer tables,” http://www.accudynetest.com/polymer_tables.html, Mar 2009.

2117. Smith, R.E., “Recommended treatment levels for various polymer/process combinations,” http://www.accudynetest.com/recommended_treat_levels.html, Mar 2009.

2116. Smith, R.E., “Surface treatment discussion,” http://www.accudynetest.com/surface_treatment.html, Mar 2009.

2112. Smith, R.E., “Dyne testing - applications and tips,” http://www.accudynetest.com/adtusage.html, Mar 2009.

2111. Smith, R.E., “ACCU DYNE TEST: Introduction and overview,” http://www.accudynetest.com/adt_introduction.html, Mar 2009.

1844. Kan, C.W., and C.W.M. Yuen, “Influence of plasma treatment on the wettability and dryability of synthetic fibres,” PMSE Preprints, 100, 79-80 (Mar 2009).

1843. Zhang, C., B. Li, F. Yan, L. Wu, and O. Zhang, “Study of surface hydrophilicity and mechanical properties of polypropylene modified by peregal,” PMSE Preprints, 100, 237-238 (Mar 2009).

1822. Hasselbacher, N., “Prestige treatment,” Converting, 27, 36-39 (Feb 2009).

2124. Smith, R.E., “Surface tension components and molecular weights of selected liquids,” http://www.accudynetest.com/surface_tension_table.html, Jan 2009.

2123. Smith, R.E., “Viscosity, surface tension, specific density, and molecular weight of selected liquids,” http://www.accudynetest.com/visc_table.html, Jan 2009.

2122. Smith, R.E., “Surface tension, Hansen Solubility Parameters, molar volume, enthalpy of evaporation, and molecular weight of selected liquids,” http://www.accudynetest.com/solubility_table.html, Jan 2009.

1771. Wolf, R.A., “How to determine optimal treatment levels for plastic films,” Flexo, 34, 34-36 (Jan 2009).

1921. Dillingham, R.G., B.R. Oakley, and D. Gilpin, “Wetting measurements for identification of specific functional groups responsible for adhesion,” J. Adhesion, 84, 1007-1022 (Dec 2008).

1890. Lerous, F., C. Compagne, A. Perwuelz, and L. Gengembre, “Polypropylene film chemical and physical modifications by dielectric barrier discharge plasma treatment at atmospheric pressure,” J. Colloid and Interface Science, 328, 412-420 (Dec 2008).

1730. Klein, K., “Efficient corona treating saves time and energy,” Flexible Packaging, 10, 26 (Nov 2008).

1740. Varella, R., “Business strategies: Surface treatments,” Plastics Decorating, 0, 30-32 (Oct 2008).

1720. Bodine, J., “Overtreatment of PET: Fact or fiction,” in AIMCAL 2008 Fall Technical Conference, AIMCAL, Oct 2008.

1708. Bishop, C.K., “Question re plasma treatment: Effect of distance of plasma target plates and substrate surface, and possibility of back treatment during plasma treatment,” http://www.vacuumcoatingblog.com, Jul 2008.

1922. Guild, F.J., M.D. Green, R. Stewart, and V. Goodship, “Air plasma pre-treatment for polypropylene automotive bumpers,” J. Adhesion, 84, 530-542 (Jun 2008).

1713. Gilbertson, T.J., “Troubleshoot surface treating for print,” Converting, 26, 42-47 (Jun 2008).

1707. Bishop, C.K., “Coefficient of friction (COF) of plain & metallized films,” http://www.vacuumcoatingblog.com, Jun 2008.

2086. Minzari, D., P. Moller, P. Kingshott, L.H. Christensen, and R. Ambat, “Surface oxide formation during corona discharge of AA 1050 aluminum surfaces,” Corrosion Science, 50, 1321-1330 (May 2008).

1711. Bishop, C.K., “Question re static: Will the presence of static on the face of a material affect its surface energy?,” http://www.vacuumcoatingblog.com, Apr 2008.

1710. Bishop, C.K., “Problem with low bond strength of plasma treated metallized film,” http://www.vacuumcoatingblog.com, Apr 2008.

1709. Bishop, C.K., “Delamination problem in adhesive-laminated 3-ply structures of reverse-printed PET:metPET:LLDPE sealant web,” http://www.vacuumcoatingblog.com, Apr 2008.

1704. Song, S., and F. Placido, “Effect on adhesion of gas release from polymer surfaces,” Presented at 51st Annual Technical Conference, Society of Vacuum Coaters, Apr 2008.

1712. Bishop, C.K., “Problem re ink adhesion to metallized film,” http://www.vacuumcoatingblog.com, Mar 2008.

1702. Berthier, J., “Theory of wetting,” in Microdrops and Digital Microfluidics, 7-74, William Andrew Inc., Mar 2008.

1701. Kondyurin, A., and M. Bilek, “Wetting,” in Ion Beam Treatment of Polymers: Application Aspects from Medicine to Space, 147-160, Elsevier, Mar 2008.

1700. Kondyurin, A., and M. Bilek, “Interactions of ion beam with polymer: Chemical picture,” in Ion Beam Treatment of Polymers: Application Aspects from Medicine to Space, 29-74, Elsevier, Mar 2008.

1699. Kondyurin, A., and M. Bilek, “Interactions of ion beam with polymer: Physical picture,” in Ion Beam Treatment of Polymers: Application Aspects from Medicine to Space, 1-10, Elsevier, Mar 2008.

1691. Al-Turaif, H., “Relationship between surface chemistry and surface energy of different shape pigment blend coatings,” J. Coatings Technology and Research, 5, 85-91 (Mar 2008).

<-- Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | 41 | 42 | 43 | 44 | 45 | 46 | 47 | 48 | 49 | 50 | 51 | 52 | 53 | 54 | Next-->